TDR Measurement system
Picotest J2154A PerfectPulse® Differential TDR
The Picotest J2154A is a compact, portable TDR that transforms an oscilloscope into a PCB Trace, Cable, Connector, and Coupon Tester. It features a 10.5GHz pulse generator, internal power splitter, and enhanced jitter performance of about 20dB.
PerfectPulse TDR signal generator
- Single-Ended and Différents TDR support
- ~35ps edge pulse.
- 50 Ohm output, free of overshoot and undershoot.
- 10GHz power splitter enhances versatility.
P2105A 4-in-1 Single-Ended TDR Probe
P2105A Single-Ended 50 Ohm probe are 50 ohms can be used with any 50 Ohm instrument such as oscilloscopes and VNA’s.
Probe Manual:
- P2105A Single-Ended probe: See page 12
P2103A Differential TDR Probe
P2103A Differential probe is 100 Ohms thatcan be used with any 50 ohm instrument such as oscilloscopes and VNA’s.
Probe Manual:
- P2103A Differential Probes: See Page 9
Making probing better
3DPP-200 Probe Holder Set
The Picotest Probe Holder is a Swiss-engineered joints ensure maximum stability and precision. The ball-and-socket joints deliver high static friction, keeping your probes firmly in place even during the most demanding tests. A single turn of the fastening screw tightens all three joints simultaneously.
- Stable Base: Provides strong support for the articulating arm. 4.5in diameter; 0.5in height; M6 thread.
- Articulating Arm: Offers continuous adjustability, allowing you to position probes at any desired angle, far beyond the limitations of conventional perpendicular-only holders. 200mm length; M6 top and bottom threads; holding force 20 (N).
- Versatile Probe Heads: Clamp probes securely, with multiple heads included to accommodate various Picotest probe.
P2131A & P2132A Port Saver™ Instrument Protection DC Block
The Port Saver family of DC blocks offers new features to protect instruments while enhancing performance. Inrush limiting and transient protection reduce voltage spikes when a DC voltage is applied. Pre-charge eliminates inrush, and self-discharge prevents damage from stored energy.
P2131A - DC Blocker 500Hz – 800MHz (Works with all 50 ohm equipment, 75VDC maximum differential voltage).
P2131A - DC Blocker 2Hz – 50MHz (Works with all 50 ohm equipment, 6VDC maximum differential voltage)